• head_banner_01
  • head_banner_02

Universal throttle body position sensor auto parts for chery

Short Description:

The throttle position sensor is used to detect the throttle opening angle on the one hand, as a reference signal for the engine load, and on the other hand to reflect the speed of the throttle opening change, so as to reflect the driver’s driving intention. For the electronic control system of the automatic transmission, the throttle position sensor is mainly used to detect the opening of the throttle, reflect the load of the engine, and serve as an important signal for the control of the shift timing.


Product Detail

Product Tags

Product name Position sensor
Country of origin China
Package Chery packaging, neutral packaging or your own packaging
Warranty 1 year
MOQ 10 sets
Application Chery car parts
Sample order support
port Any Chinese port,wuhu or shanghai is best
Supply Capacity 30000sets/months

The throttle position sensor is installed on the throttle body. With the change of the throttle opening and the rotation of the throttle shaft, the brush in the sensor is driven to slide or the guide cam rotates, and the angle signal of the throttle opening is converted into an electrical signal. To ECU. Cars installed in automatic transmissions usually use linear output type throttle position sensors.

How much does a Chery throttle body sensor replacement cost?
An internal combustion engine requires a mixture of air and fuel to provide the energy for combustion. The air-to-fuel ratio needs to be correct for your Chery’s engine to run smoothly and to deliver a prompt response to your driving throttle demands.

The amount of throttle being requested by the driver is monitored by a throttle position sensor (TPS) which determines the airflow through the Chery’s throttle body. The throttle position sensor plays a crucial part in the Chery’s engine management system and if it fails, the check engine light may appear and you may notice engine misfire and/or poor performance.

The throttle position sensor is usually situated next to the Chery’s throttle body. In some cases, it connects with the butterfly spindle to monitor the throttle position. However, on ‘drive-by-wire’ or electronic throttle control (ETC) systems it can also control the throttle position. It controls the rate and volume of airflow into the engine.

Anytime the air/fuel mixture might be incorrect on a Chery it is a cause for concern and the problem should be rectified as soon as possible. There is the chance of engine damage if this issue is left for too long, and driving an unhappy Chery is never a relaxing drive.


  • Previous:
  • Next:

  • Write your message here and send it to us