|Country of origin
|Chery packaging, neutral packaging or your own packaging
|Chery car parts
|Any Chinese port,wuhu or shanghai is best
The broken ball joint of automobile tie rod will lead to steering wheel shaking, brake deviation and direction failure. In serious cases, the wheel may fall off instantly due to the falling off of ball joint, with serious consequences. It is recommended to replace it in time. The pull rod ball head is a pull rod with a ball head housing. The ball head of the steering main shaft is placed in the ball head housing. The ball head is hinged with the edge of the shaft hole of the ball head housing through the ball head seat at the front end. The needle roller between the ball head seat and the steering main shaft is embedded in the groove of the inner hole surface of the ball head seat, which has the characteristics of reducing the wear of the ball head and improving the tensile strength of the main shaft. The following small series will give you a detailed introduction to the knowledge of automobile tie rod ball joint. If you want to know more information, continue to pay attention to the electric state.
The symptoms of broken tie rod ball joint mainly include the following situations
1. If the front wheel ball joint of the car is broken, the following symptoms will appear
a. Bumpy road, cluttering;
b. The car is unstable, swinging left and right;
c. Brake deviation;
d. Direction failure.
2. The ball joint is too wide and easy to break under impact load. Repair as soon as possible to avoid danger.
3. The outer ball joint refers to the hand pull rod ball joint, and the inner ball joint refers to the steering gear pull rod ball joint. The outer ball joint and the inner ball joint are not connected together, but work together. The steering machine ball head is connected to the sheep horn, and the hand pull rod ball head is connected to the parallel rod.
4. Looseness of the ball joint of the steering tie rod will lead to steering deviation, tire eating and steering wheel shaking. In serious cases, the ball joint may fall off and cause the wheel to fall off instantaneously. It is recommended to replace it in time to avoid potential safety hazards