Manufacturer for Chery Qq Bearing - AC SYSTEM COMPRESSOR for CHERY EASTAR B11 – Qingzhi
Manufacturer for Chery Qq Bearing - AC SYSTEM COMPRESSOR for CHERY EASTAR B11 – Qingzhi Detail:
B11-8104021 BRACKET – COMPRESSOR
Q1841040 BOLT – HEXAGON FLANGE
Q184C1025 BOLT
MD317245 V BELT
B11-8104010 BRACKET ASSY – COMPRESSOR
Q14608100 BOLT
B11-8104017 PULLEY-COMPRESSOR
B11-8104310AB MAGNET CLUTCH
B11-8104010AB BRACKET ASSY – COMPRESSOR
B11-8105015 BOLT
11 T11-3708110 STARTER
1. Compression process: the compressor sucks the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator, compresses it into high-temperature and high-pressure gas, and discharges it from the compressor.
4. Endothermic process: the mist refrigerant liquid enters the evaporator. At this time, the boiling point of the refrigerant is far lower than the temperature in the evaporator, so the refrigerant liquid evaporates into gas. In the evaporation process, a large amount of surrounding heat is absorbed, and then the ‘refrigerant vapor with low temperature and low pressure’ enters the compressor again. The above process is carried out repeatedly to reduce the air temperature around the evaporator.
1. Compression process: the compressor sucks the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator, compresses it into high-temperature and high-pressure gas, and discharges it from the compressor.
4. Endothermic process: the mist refrigerant liquid enters the evaporator. At this time, the boiling point of the refrigerant is far lower than the temperature in the evaporator, so the refrigerant liquid evaporates into gas. In the evaporation process, a large amount of surrounding heat is absorbed, and then the refrigerant vapor with low temperature and low pressure enters the compressor again. The above process is carried out repeatedly to reduce the air temperature around the evaporator.
1. Compression process: the compressor sucks the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator, compresses it into high-temperature and high-pressure gas, and discharges it from the compressor.
4. Endothermic process: the mist refrigerant liquid enters the evaporator. At this time, the boiling point of the refrigerant is far lower than the temperature in the evaporator, so the refrigerant liquid evaporates into gas. In the evaporation process, a large amount of surrounding heat is absorbed, and then the refrigerant vapor with low temperature and low pressure enters the compressor again. The above process is carried out repeatedly to reduce the air temperature around the evaporator.
Product detail pictures:
Related Product Guide:
Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for Manufacturer for Chery Qq Bearing - AC SYSTEM COMPRESSOR for CHERY EASTAR B11 – Qingzhi , The product will supply to all over the world, such as: Oman , azerbaijan , Czech republic , Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.
By Doris
from Greece
- 2017.04.28 15:45
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Renee
from Sweden
- 2017.12.19 11:10
