China 1.1L ENGINE COOLING SYSTEM for CHERY QQ SWEET S11 1.1L Manufacturer and Supplier | DEYI
  • head_banner_01
  • head_banner_02

1.1L ENGINE COOLING SYSTEM for CHERY QQ SWEET S11 1.1L

Short Description:

1 Q1400612 BOLT HEXAGON HEAD
2 372-1307014 WATER PUMP PULLEY
3 Q1840840 BOLT HEXAGON FLANGE
4 Q1840855 BOLTM8X55©
5 Q1840865 BOLT HEXAGON FLANGE
6 372-1307010 PUMP SET WATER
7 372-1307015 RING ®O
8 372-1307041 WATER PUMP WASHER
9 372-1307018 SEAL STRIP 2
10 Q1840825 BOLT
11 372-1307019 SEAL STRIP 3
12 372-1307012 SEAL STRIP 1
13 GB50-18 RING,’O’ RUBBER
14 372-1306016 SEAT – THERMOSTAT OUTER
20 372-1306017 PIPE
15 372-1306020 THERMOSTAT ASSY
16 372-1306001 SEAT – THERMOSTAT
17 Q1840850 BOLT HEXAGON FLANGE
18 372-1306012 SEAT – THERMOSTAT INNER
19 372-1306018 SEAT – THERMOSTAT


Product Detail

Product Tags

1 Q1400612 BOLT HEXAGON HEAD
2 372-1307014 WATER PUMP PULLEY
3 Q1840840 BOLT HEXAGON FLANGE
4 Q1840855 BOLTM8X55©
5 Q1840865 BOLT HEXAGON FLANGE
6 372-1307010 PUMP SET WATER
7 372-1307015 RING ®O
8 372-1307041 WATER PUMP WASHER
9 372-1307018 SEAL STRIP 2
10 Q1840825 BOLT
11 372-1307019 SEAL STRIP 3
12 372-1307012 SEAL STRIP 1
13 GB50-18 RING,’O’ RUBBER
14 372-1306016 SEAT – THERMOSTAT OUTER
20 372-1306017 PIPE
15 372-1306020 THERMOSTAT ASSY
16 372-1306001 SEAT – THERMOSTAT
17 Q1840850 BOLT HEXAGON FLANGE
18 372-1306012 SEAT – THERMOSTAT INNER
19 372-1306018 SEAT – THERMOSTAT

 

How is the exhaust in the cooling pipe of Chery QQ engine?
1. Unscrew the water tank cover, open the water drain valve of the water tank and drain the antifreeze.
2. Add water to the water tank and continuously flow through the engine cooling system. Until clear water is discharged from the water tank, and the engine runs at idle speed if necessary.
3. After the water in the cooling system is drained, close the water drain valve of the water tank.
4. Flush antifreeze reservoir.
5. Add antifreeze to fill the water tank with antifreeze. Unscrew the reservoir cap, add antifreeze to the “full” mark, and do not exceed the “full” mark.
6. Cover the water tank cover and liquid storage tank cover and tighten them.
7. Start the engine, idle for 2 ~ 3min, and unscrew the water tank cover. At this time, the antifreeze level of the cooling system will decrease due to the elimination of some air. At this time, antifreeze should be supplemented until the water tank is full.
8. Cover the water tank cover and tighten it.
Note: it is forbidden to open the water tank cover or drain valve when the antifreeze temperature is very high to avoid scalding.
The full name of antifreeze should be called antifreeze coolant, which means coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator and damaging the engine cylinder block or head when parking in cold winter. In fact, many people think that antifreeze is not only used in winter, but we need to correct it all year round.


  • Previous:
  • Next:

  • Write your message here and send it to us